Day 14: Sanding Fillets

This morning we did a quick sanding of the fillets, screw hole putty and filed down the fillet cap on the bow post and transom.

After the sanding we spent a lot of time with the tape measure. We needed to create the aft thwart for the rear cross hatch and the forward thwart for the front cross hatch. It took some head scratching and a bit of time but we got a pretty sweet fit at the end of it all. So we got those cut out of the 3/4 ply and also cut out the front seat and it fits nicely.

We also, measured out all the pieces for the boatman's foot well and the side hatches so hopefully tomorrow morning we'll get those cut.